Some might consider it strange to use an antique buffet as a dresser, but this piece of furniture simply suited my needs: space to store all the smaller and delicate items in my bedroom—while also looking exquisite.
I’ve had this piece for a long time. Over the last several years, I felt it didn’t quite fit in any particular room; however, I couldn’t stand giving this gem away. The sad antique buffet migrated around the house before it eventually settled in a corner of a basement storage room.
In my house—if I hold onto a piece long enough—furniture will, sooner or later, take on a new purpose. And that is just what happened.
I have always wanted a dressing table and thought this would be a perfect addition to the yearlong makeover of my dressing room. It has perfect little drawers (originally used for silverware) convenient for makeup and brushes. Pretty baskets of my necessities take the place of fine china.
My dilemma was to conceptualize seating in front of this antique treasure. Where would my legs go? Luckily the two bottom cabinet doors open, so I would just have them open when in use.
As far as the color choice, I contemplated the options for almost a year before finally deciding on a soft gold. Since gold is the accent color of this otherwise white-on-white room, the color combo just screams elegance.
Every room needs that signature piece, and the dressing table is that signature for this room. Below are the items and steps that I used to complete this DIY project.
Items neededr
- r
- 1 classic piece of furniture (or something you would like to breathe new life into)
- Sandpaper in medium grit
- 1 sponge roller (this is for the smooth finish)
- 2-3 hand sponge applicators
- 1 can of Zinsser Cover Stain Interior Latex Primer (available at Home Depot or Lowe’s)
- 1 can of Modern Masters Metallic Paint in “pale gold” (purchased in Omaha at The Color Store Inc.)
r
r
r
r
r
r
r
Instructionsr
- r
- rRemove all hardware, including drawers and cabinet doors, from your furniture. Save it if you are using them later.r
- Either sand until you remove the glossy finish, or you can use a primer/stain-blocker with a bonding agent (depending on the condition your piece is in).
- Once you have sanded, or put on several coats of the primer-bonding agent, use your hand sponge applicator to get in the hard-to-access areas and detailed spots. You can then use the foam roller to cover the entire piece. I painted the base of the piece before painting the drawers and doors.
- Now you are ready for the top coat. Use the same process as with the primer to coat the entire piece. I discovered it may have been easier to have my primer tinted closer to the gold color, but I did not do this, so I had to paint an extra coat.
r
r
r
r
r
Note: If you are not quite comfortable going by these instructions, search YouTube for wooden furniture painting tutorials.
rSandy’s year long DIY remodeling series began with an introduction to the room in the January/February issue. The first of five projects, a hanging coffee filter lamp, debuted in March/April issue. Rustic wall vases followed in the May/June issue. Vintage classic chairs were in the July/August issue. Stay tuned for the next installment. Visit readonlinenow.com to review back issues.
rThis article appears in the September/October 2017 edition of Omaha Home.